Furniture. Saturday , May 05th , 2018 - 20:58:20 PM
The same hot iron and gluing method is used in repairing marquetry. Lay a piece of paper over the missing section and rub with a soft pencil to get an outline of the area. Cut the paper to the pattern and stick it to the replacement piece of wood. Cut the wood slightly larger than the pattern and rub down with glass-paper until the exact fit can be obtained. Stick it into place with cold wood glue. On many antique furniture pieces the marquetry tends to lift through age and using the warm iron technique will heat the glue and the raised piece can be gently pressed down back into position. If dust has been trapped under the lifted section, it should be removed, cleaned and re-stuck into position.
Packing: Good packing can ensure that the furniture will be as beautiful as it was when it was stored. As a first step, you can disassemble beds and tables before storing. You can apply a coat of wax to protect its sheen. All the screws, bolts, and nuts should be placed in a clear plastic bag and tied to the bed frame. A quilt can be wrapped around tabletops and headboards to prevent denting and scratching.
Cover the sofas with a cotton sheet and place them on a plastic sheet. Light chairs can be stacked on top of the other. But secure them carefully so that they don't trip and damage other items. You can use mattresses as buffers between each item.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Couleur claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.